PRODUCTS
SEND US A MESSAGE
If you have any questions, please contact us and we will contact you as soon as possible.
RECOMMEND
Ferrosilicon 75- Silicon Manganese 6517
- Low Carbon Ferromanganese
- Manganese Metal
- Ordinary Metal Silicon
- Iron Molybdenum 70
- Ferrovanadium80
- Ferrotitanium 70
- Titanium Chips
Iron Niobium 70- Iron Niobium 60
- Ferroniobium
- Iron Niobium 50
- Iron Molybdenum 70-2
- Iron Molybdenum 60-2
- Iron Molybdenum 60
- Ferromolybdenum
- Iron Molybdenum 55
- Ferrotitanium 40
- Ferrotitanium
- Ferrotitanium 30
- Medium Carbon Ferromanganese
- Ferro Manganese
- High Carbon Ferromanganese
- Silicon Metal
‹
›
‹
›
Chemical Content Table
Product Details
Introduction to Ferrochrome
Chromium iron is an iron alloy composed of chromium and iron. Chromium iron is an important alloy additive in steelmaking. High carbon ferrochrome is made from chromite and silicon as slag fluxes. It is a solid solution of chromium, iron, and carbon, and a complex compound of chromium, iron, and carbon. This product is one of the most common ferroalloys, with characteristics such as high strength, corrosion resistance, wear resistance, high temperature resistance, and oxidation resistance.
Introduction to medium carbon ferrochrome
When using chrome ore concentrate for medium carbon ferrochrome, the refining slag has a large viscosity and a high melting point, and the smelting process temperature must be high. Therefore, the power consumption is high, the furnace lining life is short, and the carbon content is not easy to come down. Oxygen blowing smelting of medium carbon ferrochrome has greater advantages, such as high productivity, low cost, high recovery rate, etc.
Specification and particle size: natural lump, 10-100mm, powder or according to customer's requirement.
Packing: one metric tonne in a big bag or according to customer's requirement
The use of medium carbon ferrochrome
Adding chromium to steel can significantly improve its oxidation resistance and corrosion resistance. Chromium is contained in many steels with special physical and chemical properties. Medium and low carbon ferrochrome is used in the production of medium and low carbon structural steel, carburized steel, gears, high-pressure blower blades, valve plates, etc. Microcarbon ferrochrome is used in the production of stainless steel, acid resistant steel, heat-resistant steel, and electric heating alloys.
Product Packaging
Product Transportation
Factory Tour
Product Process
Raw material mining
Synthetic crushing and processing
Ore crushing and crushing
Product packaging
Ore smelting
QC
Cooling and solidification of alloy
Warehousing and Logistics
Qualifications
Get Your Free Quote Now!
Related Products
- Ferrotitanium 70Ferro Titanium, an intermediate alloy of titanium and iron, is used as a purifying agent for steel. Production process: Ferro-titanium is an alloy of titanium and iron. The process of producing ferrotitanium usually involves mixing titanium and iron feedstocks and reacting them at high temperatures.View Products
- Ferrovanadium80Ferrovanadium is a ferroalloy obtained by reducing vanadium pentoxide with carbon in an electric furnace, or by reducing vanadium pentoxide in an electric furnace by the silicothermal method. Ferrovanadium is a ferroalloy consisting of vanadium and iron, and is mainly used as an alloy additive in steel making. High vanadium ferrovanadium is also used as an additive in non-ferrous alloys. Three types of ferrovanadium containing 40%, 50%, 60% and 80% vanadium are commonly used.View Products
- Iron Molybdenum 70FeMo is an iron alloy consisting of molybdenum and iron, generally containing 50-70% molybdenum, and is used as an alloying additive in steelmaking. Ferro Molybdenum is an alloy of molybdenum and iron. Its main use is as a molybdenum additive in steelmaking. Adding molybdenum to steel gives it a uniform fine grain organisation, improves its hardenability, helps eliminate temper brittleness, and alloys with special physical properties. Adding molybdenum to cast iron improves its strength and wear resistance.View Products
- Ordinary Metal SiliconSilicon metal smelting belongs to the high energy consumption production, China's silicon metal production has been a long time, with the tightening of the national energy policy and energy saving and emission reduction, as well as the promotion of new energy sources, silicon metal smelting has become the primary products and processes, many domestic emerging energy companies to build a series of silicon metal, polysilicon, monocrystalline silicon, solar cells and other recycling industrial chain, the next few years will inevitably affect the development of the entire energy sector and new energy sources in China. The next few years will inevitably affect the development of China's entire energy sector and the application of new energy.View Products
- Manganese MetalIt is also an important alloying element used in the manufacture of stainless steels, high-strength low alloy steels (HSLA), aluminium-manganese alloys and copper-manganese alloys. Manganese metal can be produced industrially and almost all of it is used in the steel industry to make ferromanganese alloys. Manganese ferroalloys can be obtained by reducing the appropriate proportions of iron oxide (Fe₂O₃) and manganese dioxide (MnO₂) with carbon (graphite) in a blast furnace. Pure manganese metal can be produced by electrolysis of manganese sulphate (MnSO₄).View Products
- Low Carbon FerromanganeseQuality Assurance
Delivery Time: Fast delivery within 3-7 days.
Samples: Free samples are available.
We offer ferromanganese grades for selection.
First order discount, contact us now.View Products - Silicon Manganese 6517Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production.View Products
- Ferrosilicon 75Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron silicon alloy made by melting coke, scrap steel, quartz (or silica) as raw materials in an electric furnace. The manufacturer provides four grades of ferrosilicon, 75 # 72 # 70 # 65 #. The price of ferrosilicon is favorable, and the processing granularity includes natural blocks, standard blocks, particles, powders, etc. Can be provided according to customer requirements.View Products
- Ferrovanadium40Ferrovanadium is a ferroalloy obtained by reducing vanadium pentoxide with carbon in an electric furnace, or by reducing vanadium pentoxide in an electric furnace by the silicothermal method. Ferrovanadium is a ferroalloy consisting of vanadium and iron, and is mainly used as an alloy additive in steel making. High vanadium ferrovanadium is also used as an additive in non-ferrous alloys. Three types of ferrovanadium containing 40%, 50%, 60% and 80% vanadium are commonly used.View Products
- Ferrovanadium 50Ferrovanadium is a ferroalloy obtained by reducing vanadium pentoxide with carbon in an electric furnace, or by reducing vanadium pentoxide in an electric furnace by the silicothermal method. Ferrovanadium is a ferroalloy consisting of vanadium and iron, and is mainly used as an alloy additive in steel making. High vanadium ferrovanadium is also used as an additive in non-ferrous alloys. Three types of ferrovanadium containing 40%, 50%, 60% and 80% vanadium are commonly used.View Products
- FerrovanadiumFerrovanadium is a ferroalloy obtained by reducing vanadium pentoxide with carbon in an electric furnace, or by reducing vanadium pentoxide in an electric furnace by the silicothermal method. Ferrovanadium is a ferroalloy consisting of vanadium and iron, and is mainly used as an alloy additive in steel making. High vanadium ferrovanadium is also used as an additive in non-ferrous alloys. Three types of ferrovanadium containing 40%, 50%, 60% and 80% vanadium are commonly used.View Products
- Ferrovanadium60Ferrovanadium is a ferroalloy obtained by reducing vanadium pentoxide with carbon in an electric furnace, or by reducing vanadium pentoxide in an electric furnace by the silicothermal method. Ferrovanadium is a ferroalloy consisting of vanadium and iron, and is mainly used as an alloy additive in steel making. High vanadium ferrovanadium is also used as an additive in non-ferrous alloys. Three types of ferrovanadium containing 40%, 50%, 60% and 80% vanadium are commonly used.View Products
- Calcium Silicon Cored WireSilicon calcium wire is an additive in steelmaking, which is beneficial to adjust and control the content of easily oxidized elements and trace elements, can significantly increase the alloy yield, reduce smelting costs, shorten smelting time, and accurately control the composition. It can purify molten steel and partially change the properties and morphology of inclusions, improve the quality of molten steel and improve the casting state. It is mainly composed of silicate cement and inorganic reinforcing materials, has excellent crack resistance and durability, and is suitable for crack resistance reinforcement and waterproofing in various building structures.View Products
Please give us a message